Switchpros PowerTray - 4Runner/FJ Cruiser/GX

  • $100.00

Will not ship until

COMBINING THE POWER OF THE SWITCH-PROS MODULE WITH THE ORGANIZATION OF BLUE SEA SYSTEMS GIVES YOU EVERYTHING YOU NEED TO ORGANIZE AND MAINTAIN YOUR ELECTRICAL SYSTEM LIKE A PROFESSIONAL.

Take all the guess work out of wiring up a new accessory. The Switch-Pros PowerTray employs a dedicated 8 circuit barrier terminal block and low profile grounding busbar, which creates the ultimate wire management solution for your Switch-Pros. No more fiddling around with excess wires or scrambling to find a secure and reliable ground for each of your accessories. We've been there and done that and learned from our frustration.

Now with the Switch-Pros PowerTray system installed, wiring up a new accessory is as easy as taking the positive and negative wires, crimping on some ring terminals, and simply attaching the positive to one of the 8 circuits on the barrier terminal block and the negative to your common ground busbar. That's it, you're done! No need to bust out a soldering iron or buy fancy connectors that require expensive specialty crimpers.

The Switch-Pros PowerTray also features the Blue Sea 6 circuit fuse block, which expands the system’s capacity by giving you the added ability to wire in accessories that would otherwise be inconvenient to power though your Switch-Pros. For example, under hood lights and cargo lights can now have an external switch located right where you want it, no more running back into the cab to turn them on.

This addition fuse block is also great for accessories like front/rear mount cameras, aftermarket HID headlights, aftermarket Horns, air compressors etc. Accessories like this use the vehicles own factory wiring to activate the accessory, but due to the thin gauge of wire used for OEM applications most aftermarket parts like these need more robust power source to draw from.

This product is for the Switch-Pros PowerTray Mounting Platform, Support Leg, and mounting hardware.

It does not include the Switch-Pros, Blue Sea accessories, Power/Ground Cables, terminals/fuses etc.

FEATURES:

  • 1/8th Inch 5052 Aircraft Aluminum - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.
  • Waterjet manufacturing - Guarantees precise cuts with an accuracy of ±0.003", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.
  • Chamfered edges - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.
  • Perfect fit - Don't sacrifice access to your factory fuse block with other mounts! Each PowerTray is designed around your factory components.
  • Unparalleled stability - Utilizing three points of contact, you can be sure that your valuable electronics are safe and supported by including an additional support leg that secures the far-side of the tray to the lower inner fender.
  • High Quality JIS Class 10.9 Steel Hardware - Your entire Toyota is built with JIS (Japanese industrial standard) hardware so why should your aftermarket parts be any different.
  • Power Made Easy - Delivered right to your door with step-by-step installation instructions.

THIS POWERTRAY WILL FIT THE FOLLOWING VEHICLES:

  • Toyota FJ cruiser 07-14 with Automatic Transmission
    • Unfortunately manual transmission FJ's have a clutch fluid reservoir mounted in the same location the PowerTray is designed to install. So if your FJ has a manual transmission then shoot us an email with pictures of the reservoir and please include vehicle info like year, make, and model so we can go over options for relocating the reservoir.  info@hotshotoffroad.com
    • Note: FJ cruiser's with the rear 400w inverter may have a small relay box bolted to the fender that will need trimmed. CLICK HERE for pic of bracket.
  • Toyota 5th gen 4Runner's 09-Current
    • Note: 2020+ 4runners have an additional relay/fuse box located on the fender that will need to be relocated closer to the cab of the vehicle in order to install this PowerTray. CLICK HERE to see the process.
  • Toyota 4th gen 4Runner's 02-09
    • Note: 4th gen 4Runners have less hood clearance compared to newer models and this PowerTray will need spaced out 1/2 inch in order to clear the factory hood struts. Please email us at info@hotshotoffroad.com for info on the spacer kit.
  • Lexus GX470 02-09 and GX460 10-Current
    • Note: These vehicles may have a plastic vanity cover that will need to be removed and discarded. But nothing should actually hinder installation.

newsletter sign-up

newsletter sign-up

Join today for exclusive updates offers and promotions, only available to members of the official Hotshot Offroad newsletter.

free shipping

free shipping $30+

Available on all orders of $30 or more to the contiguous lower 48 states. No code required at checkout.

WHO WE ARE

Our goal is to provide you with all of the parts you need for your build and the tools necessary to make educated decisions!

Please visit our Youtube Channel, and browse the Tips & Tutorials section for educational materials. Please don't hesitate to Reach Out if you have questions or Need A Quote for parts that you don't see here!

more to offer

The products you see on this site are only our most popular offerings. We have thousands more products that we offer and stock, and will continue to move into the site. We can get them for you now though!

Please fill out our Custom Quote Form, and we will get you exactly what you are looking for!