Click To Enlarge

Big Bear Roof Rack | 07-21 Tundra

Sherpa Equipment Co

Product Sku: 125844

$1,189.15
Save $209.85

Select your options

Full Height (No Light Bar)

Half Height (For Single Row Light Bar)

Quantity

This full-length aluminum roof rack, for the 2007-2021 Toyota Tundra Crew Max, expands on our lineup of tried and true rack systems. Our racks are some of the toughest on the market and are designed to get your gear to the places that matter the most. Explore more and worry less with our industry-leading ¼” thick aircraft-grade aluminum side panels and stainless steel hardware. Secure your gear by bolting into one of the 7 extrusion crossbars or by strapping it directly to the side plates.

THIS RACK REQUIRES DRILLING AND INSTALLATION OF RIVETS. PROFESSIONAL INSTALLATION RECOMMENDED.

Powder-coated orders will ship standard with black oxide stainless hardware. Raw aluminum will ship with standard stainless hardware.

ESTIMATED LEAD TIME - 1-2 WEEKS

THE SPECS

DESIGNED FOR: 2007-2021 TOYOTA TUNDRA CREW MAX
PRODUCT DIMENSIONS: 72.5”X53.5”X2.5”*
CROSSBAR DIMENSIONS: 1”X2”X53”
LOAD RATING: 300 LBS. DYNAMIC || 600 LBS. STATIC
NUMBER OF CROSSBARS: 7
OVERALL WEIGHT: ~54 LBS.

*Measured at the Center of the Roof

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO RUST

INCLUDED:
(2) Sideplates
(7) Crossbars
(4) Mounting Brackets & Rubber Seals
(1) Fairing with Edge Trim
All required hardware for assembly

newsletter sign-up

Join today for exclusive updates offers and promotions, only available to members of the official Hotshot Offroad newsletter.

free shipping $75+

Available on all orders of $75 or more to the contiguous lower 48 states. No code required at checkout.

Rock solid, great mounting system, well built

I just finished installing this yesterday. Props to HotShot for answering a last minute technical question almost immediately - that's customer service! I'm super happy with this rack, and of all the ones I've looked at, I'm glad the team at HotShot steered me this direction. The mounting design will allow this rack to be removed if needed and leaves only the rivet bases in place (no gaping holes in the roof of the truck). Now I just need to load it up with gear.

A few comments/notes regarding the installation instructions that I downloaded: They list (42) 1/4" flat washers when in reality there are (36) 1/4" BLACK flat washers and (8) 1/4" STAINLESS flat washers. Additionally, there are (8) M8 flat washers that are not listed in the instructions. They do not mention needing a 13mm wrench, but you will need that for installing the M8 bolts that attach the mount brackets to the rivet bases.

Finally, the detailed instructions state to drill a 13/64" hole, while the list of needed parts lists a 3/16" drill bit. I would recommend using the 3/16" drill bit because you will likely end up just a little bit sloppy during the drilling process (it is an awkward position standing on a ladder and trying to drill cleanly) - the rivets will fit snug with the 3/16" hole and you'll have a good solid connection. I would recommend leaving the rivet bases in place when drilling the holes because even with a good center punch it was difficult to perfectly align the holes with how the bases fit into the gutter - having them in place made a much better drill guide. I also used a wood block as my drill stop (sized the correct thickness to allow my drill bit to only extend the length of the rivet body) and that came in handy for tapping the rivets into place as well since things were just snug enough.

Oh, and one last thing - the FRONT holes of the REAR rivet bases will encounter two layers of metal that you will drill through. All the other holes only go through one layer, and that was the reason for my last minute question to HotShot in the middle of the installation.

Great Upgrade

Thanks to Colton and the crew at HotShot. Their customer service and advice was crucial in my decision making and I ended up with just what I needed. Nothing more, nothing less. Thanks!

Elite Max Headlights

I ordered the Diode Dynamics elite max headlights for my 2023 F-150. I had the quad LED headlights, and these absolutely blow them out of the water. With the high beam assist pod inside the headlight it is close to 1/2 mile visibility on level ground, absolute game changer. They look amazing and customizability is awesome. There was a bit of a longer wait than initially quoted from Diode but that was not on Hotshot's fault, and both companies were very transparent and consistently communicated with the delays in production. I WILL 100% buy from Hotshot and Diode Dynamics again.

Great customer service

Was looking for a mild but proper lift to my rig. Based on recommendations I reached out to Hotshot Off-road. Was not disappointed. Colton is extremely knowledgeable and responsive. He made sure what I ordered would meet my needs. Price also very competitive. Thank you.

Great customer Service!

Great customer service all around. They answered every question I had and my order was shipped out fast

Pro service

Bought 6112s from Hotshot at a great price and they set them up for me so it was an easy install. The shipping was super fast. Thanks Colton. I'll be back.

Big Bear Roof Rack | 07-21 Tundra

Product Sku: 125844

Select your options

ESTIMATED LEAD TIME - 1-2 WEEKS

THE SPECS

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO RUST

newsletter sign-up

newsletter sign-up

free shipping

free shipping $75+

Customer Reviews

Let customers speak for us

Big Bear Roof Rack | 07-21 Tundra

Product Sku: 125844

Select your options

ESTIMATED LEAD TIME - 1-2 WEEKS

THE SPECS

ALUMINUM COMPONENTS || STAINLESS HARDWARE || NO RUST

newsletter sign-up

newsletter sign-up

free shipping

free shipping $75+

Related Products

Customer Reviews

WHO WE ARE

more to offer

Let customers speak for us