Engine Components

Sort by

Eibach

Eibach Pro-Truck Coilover 2.0 - Spanner Wrench Kit (*Single Spanner Wrench*)

~~Regular price $27.78~~

ICON

Multi Rate Leaf Spring Hardware Kit | 17-20 Raptor/2021+ F150

Baja Designs

Baja Designs Universal Lighting License Plate Mount AU/EU/US Plate

Westin

Westin Replacement Mounting Hardware Kit for PRO TRAXX 4in Oval Nerf Bars

~~Regular price $174.80~~

Westin

Westin 2019-2020 Ram 2500/3500 HDX Grille Guard Parts Kit

~~Regular price $115.77~~

Eibach

Eibach Wheel Bolt M12 x 1.5 x 26mm x 17mm Hex Taper Seat

~~Regular price $6.67~~

Eibach

Eibach Wheel Bolt M12 x 1.5 x 40mm x 17mm Round Seat Pro-Spacer Hardware Kit - Black

~~Regular price $6.67~~

Eibach

Eibach Wheel Bolt M14 x 1.25 x 28mm x 17mm Taper Seat Pro-Spacer Hardware Kit - Black

~~Regular price $6.67~~

Westin

Westin 2020 Ford Police Interceptor Utility Elite Upright Wire Cover - Black

Westin

Westin 2014-2018 Chevrolet/GMC Truck/SUV Sensor Relocator - Black

~~Regular price $125.55~~

Westin

Westin 2019 Ford Ranger SuperCrew / SuperCab 2019 Running Board Mount Kit - Black

Eibach

Eibach Adjustable Endlink - Bolt Diameter M12 / Min Length 195mm / Max Length 225mm

~~Regular price $110.00~~

Westin

Westin Plastic End Cap 3 inch (1 piece) - Black

Westin

Westin 2014-2018 Chevrolet/GMC Truck/SUV Sensor Relocator - Black

~~Regular price $125.55~~

Westin

Westin R7 Includes front and rear end cap with fasteners - Black

Westin

Westin 2019 Chevrolet Silverado/Sierra 1500 Double/CC Non LD Running Board Mount Kit - Black

Westin

Westin 2014-2018 Chevrolet/GMC Silverado Sierra 1500 Dbl Crew Cab Running Board Mount Kit - Black

Westin

Westin 2009-2018 Dodge/Ram 1500 Quad/Crew Cab Running Board Mount Kit - Black

Westin

Westin 1999-2016 Ford F-250/350 Crew Cab Running Board Mount Kit - Black

Westin

Westin Platinum 3 Replacement Service Kit w/ 20in pad - Black

Westin

Westin Replacement Service Kit with 20in pad - Black

Westin

Westin Platinum 4 Replacement Service Kit w/ 24in pad - Black

Westin

Westin Replacement Service Kit with 21in pad - Black

Westin

Westin Platinum 4 Oval 4 in Tube Step End Cap Kit - Black

Westin

Westin Platinum 4 Replacement Service Kit w/ 24in pad - Black

Eibach

Eibach Wheel Bolt M14 x 1.5 x 60mm Flat-Head

~~Regular price $6.67~~

Eibach

Eibach Endlink Spacers - Bolt Diameter M10 / Width 5MM (Pack of 4)

~~Regular price $10.00~~

Baja Designs

Baja Designs Rally Squadron Sport Innovations Fog Pocket Kit

Excellent pre-install work Colton!

The 6112 shock bolts on top and bottom lined up perfectly, the part number on the spring was set so you can see it when the setup was installed on the truck. Also labeled which was driver/passenger side setup.
Super clean work, thank you!!

Great kit!

I’m one of those who wanted a front-end level on my 2023 F150 FX4, but was really concerned about gaining a “harsh” ride in the process. I spent way too many hours researching strut spacers and coilover kits, trying to decide which route to go and hoping to not get it wrong. For what it’s worth, I like the comfortable ride the FX4 struts and shocks provide, but they are a little too “boat-like” and induce too much body-roll while cornering to be perfect. I finally pulled the trigger on the Eibach Pro Truck Stage 2R kit after all my reading and research due to the fact that many reviewers rank it right in the middle in terms of firm to comfortable ride. I have not installed the rears, yet, but I have around 400 miles on the front coilovers and this is what I’ve learned.

I’m pretty mechanically inclined, but have never worked on front suspension components. That said, the install wasn’t bad. The hardest part was removing the factory struts since the lower control arm bolts are fixed to the strut. I had to completely remove the front axle nuts to get enough play in the lower assembly to facilitate removal. This wasn’t a big deal, though. Reassembly was much easier utilizing Eibach’s new hardware. Once everything was installed and buttoned back up, I found that I gained 3” of front-end lift with the Eibach threaded collars left in the factory installed positions. My truck had 3.5” of rake from the factory. I drove the truck with the springs in this position for a day. The ride was a bit rough with the springs in this position. Next day, I unscrewed the collars to drop the front end to 2” of overall lift, which is what I was going for. I was able to do this with the wheels on the truck using a hydraulic floor jack to take the truck’s weight off the springs. My alignment was out of whack from this work, so I took the truck in to get it corrected.

Once I got the lift dialed in to 2” over factory and I had my front end alignment corrected, these coilovers are pretty dang impressive. I would describe it as a more controlled factory-like ride. The truck is a joy to drive now. I’m excited to see what the addition of the rear shocks will do. This kit is an absolute upgrade to the factory suspension!

Massive improvement over stock.

Smooth, comfortable ride.

Outstanding customer service from Hot Shot Off-Road.

Great service!

Great service. I wasn't sure what I wanted and was able to discuss this with no pressure. Would happily recommend doing business with them!

Icon UCA

Billet UCA is perfect for the tundra and Hotshot couldn’t be easier to deal with!

WHO WE ARE

more to offer

Let customers speak for us